..
SPECIFICATION
MODEL RQ-125B RQ-125C RQ-125D
DC VOLTAGE
RATED CURRENT
OUTPUT
VOLTAGE ADJ. RANGE
SETUP, RISE TIME
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INPUT
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
SAFETY STANDARDS
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
OTHERS DIMENSION
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
5V 12V
CH2 CH2 CH2
-5V
CH3 CH3 CH3
-12V 5V 15V -5V -15V 5V 12V 24V -12V
CH4 CH4 CH4
11A 4.5A 1A 0.5A 10A 4A 1A 0.5A 8A 2.5A 2A 0.5A
2 ~ 12A 0.5 ~ 4.5A 0.1 ~ 1A 0 ~ 1A 2 ~ 12A 0.5 ~ 4A 0.1 ~ 1A 0 ~ 1A 2 ~ 12A 0.5 ~ 4A 0.1 ~ 2.5A 0 ~ 1A
120W 122.5W 124W
80mVp-p 120mVp-p 80mVp-p 80mVp-p 80mVp-p 120mVp-p 80mVp-p 80mVp-p 80mVp-p 120mVp-p 150mVp-p 80mVp-p
CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V CH1: 4.75 ~ 5.5V
2.0% +8,-3% +6,-10% 5.0% 2.0% +8,-3% +6,-10% 5.0% 2.0% +8,-3% 8.0% 5.0%
0.5% 1.0% 1.0% 1.0% 0.5% 1.0% 1.0% 1.0% 0.5% 1.0% 1.0% 1.0%
1.0% 3.0% 6.0% 2.0% 1.0% 3.0% 6.0% 2.0% 1.0% 3.0% 5.0% 2.0%
500ms, 20ms/230VAC           1200ms, 30ms/115VAC at full load
25ms/230VAC           30ms/115VAC at full load
47 ~ 63Hz
79% 80% 82%
CH1: 5.75 ~ 6.75V
3A/115VAC          2A/230VAC
COLD START 40A/230VAC
<2mA / 240VAC
110 ~ 150% rated output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed
UL60950-1, TUV EN60950-1 approved
Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3
-25 ~ +70 (Refer to "Derating Curve")
20 ~ 90% RH non-condensing
-40 ~ +85 , 10 ~ 95% RH
0.03%/ (0 ~ 50 )on +5V output
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
203.1Khrs min.      MIL-HDBK-217F (25 )
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
6. Each output can work within current range. But total output power can't exceed rated output power.
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
For guidance on how to perform these EMC tests, please refer to ?EMI testing of component power supplies.?
(as available on http://www.meanwell.com)
Protection type : Hiccup mode, recovers automatically after fault condition is removed
199*98*38mm (L*W*H)
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
125W Quad Output Switching Power Supply RQ- 1 2 5 ser ies
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
I/P-O/P:3KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH
CURRENT RANGE Note.6
RATED POWER Note.6
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
LINE REGULATION Note.4
LOAD REGULATION Note.5
ENVIRONMENT
PROTECTION
SAFETY &
EMC
(Note 7)
88 ~ 132VAC / 176 ~ 264VAC selected by switch           248 ~ 373VDC(Withstand 300VAC surge for 5sec. Without damage)
0.7Kg; 20pcs/14Kg/0.8CUFT
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
All using 105
Withstand 300VAC surge input for 5 second
High operating temperature up to 70
Withstand 5G vibration test
High efficiency, long life and high reliability
3 years warranty
long life electrolytic capacitors
Features :